Travertine and Limestone Installation in Nashville and Middle Tennessee
Other Stones and Custom Work

Travertine and Limestone Installation

Warm, soft natural stones for floors, walls, bath counters and fireplace surrounds, installed with sealing and care guidance.

Travertine and limestone are soft, warm natural stones with an earthy beauty that makes spaces feel calm and established. Travertine has natural pits and a banded pattern, often filled for a smoother surface, while limestone is fine-grained and quiet. They are more porous and softer than granite, so they suit floors, walls, fireplaces and bath counters better than heavy-use kitchen tops. In Nashville, they work beautifully in Mediterranean, farmhouse and transitional homes.

These stones need informed choices. They etch from acids, stain more easily and wear faster in high-traffic areas, so sealing and care are important. We help you choose the right stone and finish, plan the layout, template, coordinate fabrication and install carefully. We also explain care, so the stone ages gracefully rather than surprising you. Travertine and limestone are often chosen for their warmth, and we help you pair them with the right surroundings. A honed travertine floor with a softer wall color feels very different from a filled and polished one beside dark cabinets, so we encourage you to look at large samples in your own room. We also talk about grout color and joint width, which strongly affect the finished look. Because these stones are soft, we discuss traffic and furniture, and we suggest mats at entries and felt pads under chairs. With the right sealer and gentle cleaning, they develop a lived-in charm that many homeowners love, and we make sure you understand how to look after them from the first day.

Warm and natural

Cream, tan and ivory tones with a soft, matte character.

Softer than granite

These stones scratch and etch more easily, so they suit lower-use surfaces.

Fills and finishes

Travertine may be filled and honed, while limestone is often honed. Each finish changes the look.

Seal and maintain

Sealing is essential, and acidic cleaners must be avoided.

What is included

  • Stone and use review
  • Finish and fill selection
  • Layout and templating
  • Fabrication coordination
  • Installation
  • Sealing and care instructions
Before and after

See the transformation.

Drag the handle to compare.

After: a kitchen with one clean polished warm gray granite counter with a matching four inch backsplash and an undermount sinkBefore: a kitchen with old beige tile counters with dirty grout lines and a tile backsplashBeforeAfter
Tile counters replaced with one slab. From old beige tile counters with dirty grout lines and a tile backsplash to one clean polished warm gray granite counter with a matching four inch backsplash and an undermount sink.
Why it works

What you get with Travertine and Limestone

Warm tones

Calm, natural look.

Floors, walls, baths

Versatile uses.

Sealed

Stain protection.

Finish choices

Honed, filled, brushed.

Honest guidance

Care explained.

Careful install

Soft stone handling.

Try it now

Granite Countertop Square Footage Calculator

Enter your runs, island, backsplash and waste to see square feet to order, slabs, likely seams and a planning range.

How it works

Our process, start to finish.

  1. 01

    Call and schedule

    You tell us about your counters and what you want to change, from a repair to a whole-kitchen install, and we set a visit that fits your day.

  2. 02

    Visit and measure

    We visit, measure, check the cabinets, walls and plumbing and talk through stone, edges, seams and sinks.

  3. 03

    Choose and estimate

    We help you choose a slab at local stone yards, plan the layout and give you an itemized written estimate with options.

  4. 04

    Template

    Once cabinets are set and level, we template the real room, confirm cutouts and seams and send the plan to fabrication.

  5. 05

    Fabricate and install

    The stone is cut and polished, old counters are removed and the new granite is carried in, set, seamed and sealed.

  6. 06

    Walk and enjoy

    We walk the finished counters with you, explain care, run the water test and leave the space clean.

Questions

Travertine and Limestone FAQ

Is travertine good for countertops?

It can be for low-use areas, but granite is more durable for busy kitchens.

Does limestone stain?

It can, so sealing matters.

What is a filled travertine?

Natural holes are filled for a smoother surface.

Can I use travertine outdoors?

Yes, for patios and walls, with the right finish and sealing.

Is it slippery?

Honed or brushed finishes give better grip.

Next step

Get your free Travertine and Limestone estimate.

Tell us about your project and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your granite project

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate