Repairing cracked or chipped corners around sink openings and reinforcing the weak strip of stone so the damage does not return.
The strip of stone at the front of a sink cutout is the most vulnerable part of a granite countertop. It is narrow, carries the weight of the sink in some installations and takes stress from cabinets that move. Cracks often start at the sharp inside corners of the cutout and run toward the edge. In Nashville homes, this is the single most common place for a granite crack to appear.
We inspect the crack and the sink support. Often the sink is hanging on the stone because the clips or brackets have failed. We re-support the sink if needed, clean and fill the crack with color-matched epoxy, reinforce the front rail where appropriate, level and polish. If the stone is too damaged to repair reliably, we explain replacement options for that section. The goal is a repair that stays repaired. We also check the faucet holes and the back edge of the cutout, since stress often travels in more than one direction.
The front strip is narrow and sharp corners concentrate stress, especially if the sink is poorly supported.
Failed clips or brackets let the sink pull on the stone. We correct support first.
The crack is filled with epoxy, and a hidden reinforcement can be added across the weak strip.
Where possible, inside corners are softened to reduce the chance of recurrence.
Drag the handle to compare.
BeforeAfterWe know where to look.
Stronger than before.
Sink brackets checked.
Blends with the stone.
Repair or replace section.
Cause addressed.
Every topic has its own page with what to expect and how we approach it.
Topic guideSink Types and CutoutsUndermount, drop-in and farmhouse sinks compared, with how each affects the edge, the cutout and daily cleaning.Learn more 
Topic guideSeams and LayoutWhy granite counters have seams, where they belong, how a good seam is made and how layout affects…Learn more 
Topic guideGranite ThicknessWhy slabs come in two common thicknesses, how thickness affects support, edges, weight and look, and which fits…Learn more Tick what you see on your counters and get a priority list and a plain recommendation: care, repair, restore or replace.
You tell us about your counters and what you want to change, from a repair to a whole-kitchen install, and we set a visit that fits your day.
We visit, measure, check the cabinets, walls and plumbing and talk through stone, edges, seams and sinks.
We help you choose a slab at local stone yards, plan the layout and give you an itemized written estimate with options.
Once cabinets are set and level, we template the real room, confirm cutouts and seams and send the plan to fabrication.
The stone is cut and polished, old counters are removed and the new granite is carried in, set, seamed and sealed.
We walk the finished counters with you, explain care, run the water test and leave the space clean.
The narrow strip of stone at the cutout carries stress, especially if support has failed.
Check for sagging. If the sink moves, stop using it and call us.
A good epoxy repair is very subtle, though sometimes faintly visible.
Not if we correct the support and reinforce the strip.
Only if the damage is widespread. Many are repairable.
Crack RepairFinding the cause, then stabilizing and filling cracks with color-matched epoxy, especially around sink and cooktop cutouts.Explore 
Undermount Sink CutoutsPrecision cutouts and polished edges for undermount sinks, so the counter flows into the bowl and wipes clean…Explore 
Cabinet LevelingShimming, leveling and adding support to cabinets so they can carry heavy stone safely and the new top…Explore 
Countertop ReplacementReplacing worn, damaged or dated tops, granite or otherwise, with new granite: removal, templating, fabrication and installation in…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
